Roof Replacement guide
What a full roof replacement in Delaware actually includes, what shapes the overall investment, and how to read a written estimate before you approve it.
Last updated: November 21, 2026
A full replacement is a system, not a stack of shingles: tear-off and disposal of the old roof, deck preparation, full-deck protection, starter course, shingles, flashing, ventilation, and ridge finishing, plus the labor to install each layer as one build.
If an estimate lists only a shingle and a total, it is not describing the same job. Ask what happens at the deck, the eaves, and the flashing points before comparing totals.
Roof size and pitch set the base. Layers coming off, decking condition, flashing complexity at walls and chimneys, ventilation work, material selection, and access around the home move it from there.
Every one of those factors is knowable at an inspection, which is why ProCraft measures and documents the roof before quoting. A figure given without an inspection is a guess wearing a tie.
Line up the scope, not the totals. Same layers? Same deck plan? Same flashing and ventilation work? An estimate that skips layers will win on the day and lose in the first hard storm.
Monthly path: low monthly investment plans available, with terms reviewed in writing before you approve anything.
No. The investment depends on measurements and conditions only an inspection can document. The inspection and the written estimate are free.
Damaged sections found at tear-off are documented with photos and handled under the written scope process, so you see the condition before any added work is approved.
When the scope truly matches, yes. When it wins by leaving out layers, deck work, or ventilation, it is a smaller job at a smaller figure, not the same job for less.
You started an inspection request.
Pick up where you left off. Your answers are saved on this device.