Delaware roof investment
The honest answer has two parts. Published national data gives a planning range, and it is on this page with its sources. The exact overall investment for your roof comes from an inspection and a written estimate, because the factors that move the number live on your roof, not on a website.
Angi's 2026 national data puts the average roof replacement at $9,610 across about 33,000 projects, with most homeowners paying between $5,903 and $13,378. Per square (one square is 100 square feet of roof), published installed ranges for the materials Delaware homeowners choose between run like this:
In Delaware, an installed shingle roof starts at about $500 per square, and anything quoted under that is not a full replacement.
| Material | Published installed range |
|---|---|
| Architectural shingles | $500 to $700 per square |
| Premium designer shingles | $650 to $900 per square |
| Standing seam metal | $900 to $1500 per square |
Run your own roof through the Delaware roof cost calculator with these same bands and your roof's size, and you get a planning range for your home in about a minute.
Sources: Angi 2026 roof replacement data and HomeGuide 2026 installed ranges, as compiled in the Delaware omnipresence research, November 2026. The national figures above are background. The per square bands in the table are Delaware market planning ranges. They are not quotes, and no figure on this page is an offer.
Delaware allows a maximum of two layers of asphalt shingles on a roof. A full replacement removes what is there, and a second layer adds removal and disposal work. Tear-off of one layer is inside the published bands; an added layer runs about $50 to $100 per square in published ranges.
There is no single Delaware roofing permit rule. Permit fees across Delaware jurisdictions run from about $100 to about $1,400 depending on the county and town, and the trigger differs: New Castle County turns on a sheathing threshold, Wilmington requires a re-roof permit, and Sussex County turns on structural sheathing work or a change of material. ProCraft handles the permit as part of the job.
Delaware's median home was built in 1988, and in New Castle County the median is 1976. Older decks hide soft and stained sections that only show at tear-off. The written estimate process documents them with photos before any added work is approved.
Sussex beach towns and the bay shore add wind and salt air to the equation: flashing choices and fastening patterns carry more weight there, and design wind speeds rise toward the coast. The system ProCraft installs is built to the Florida code for exactly this reason. ProCraft is the only Delaware roofer licensed in Florida installing the Florida-code roofing system in Delaware.
Investment
Every factor is listed in the written estimate for your home.
Monthly investment
For homeowners who prefer a monthly path, low monthly investment plans available. Details are reviewed in writing before you approve anything.
Questions
Because no honest one exists before an inspection. Roof size, pitch, layers coming off, decking condition, flashing work, and ventilation are all knowable at the property and unknowable from a search result. Published national ranges frame the planning. Your written estimate is the Delaware figure for your roof.
The full system: tear-off and disposal, deck preparation, full-deck protection, starter course, shingles, flashing, ventilation, and ridge finishing, with every investment factor for your roof listed. If an estimate names only a shingle and a total, it is describing a smaller job.
Yes. Low monthly investment plans available, with the details reviewed in writing before you approve anything.
You started an inspection request.
Pick up where you left off. Your answers are saved on this device.